## F cases based on 190

This configuration use v9 configuration.

We output the high frequency data to assess MJO.

**There is a problem of units for nitrogen deposition in these runs. The results is too much vegetation but the runs are consistent with each other.**

ID | Case Description | Diagnostics | Diagnostics 1850 aerosol |
Details/Comments |
---|---|---|---|---|

190.001 | F2000 based on 190 (v9) |
PD diags | PI diags | |

190.002 | same as 190.001 + zmconv_ke = 1.0E-6->1.0E-5 |
PD diags | PI diags | |

190.003 | same as 190.001 + zmconv_ke = 1.0E-6->5.0E-6 |
PD diags | PI diags | |

190.004 | same as 190.001 + micro_mg_precip_frac_method = 'in_cloud'->'max_overlap' |
PD diags | PI diags | |

190.005 | same as 190.004 + clubb_c14 = 2.2->3.0 |
PD diags | PI diags | |

190.006 | same as 190.001 + South American SO2 emissions set to 1850 |
PD diags | PI diags | |

190.007 | same as 190.001 + sea-salt increased by 30% |
PD diags | PI diags | |

190.008 | same as 190.001 + gamma_coeff=0.30->0.32 (same tuning as Andrew's v9 ) +prescribed_strataero_use_chemtrop =false->true (same tuning as Andrew's v9 ) |
PD diags | PI diags | |

190.009 | same as 190.001 + gamma_coeff=0.30->0.32 (same tuning as Andrew's v9 ) |
PD diags | PI diags | |

190.010 | same as 190.001 micro_mg_berg_eff_factor = 0.7>1. |
PD diags | PI diags | |

190.011 | same as 190.005 +gamma_coeff=0.30->0.34 |
PD diags | PI diags | In this run we have: micro_mg_precip_frac_method = ''max_overlap' gamma_coeff=0.30->0.34 clubb_c14 = 2.2->3.0 |

190.012 | same as 190.011 + micro_mg_berg_eff_factor = 0.7>1. |
PD diags | PI diags | In this run we have: micro_mg_precip_frac_method = ''max_overlap' gamma_coeff=0.30->0.34 clubb_c14 = 2.2->3.0 micro_mg_berg_eff_factor = 0.7>1. |

190.013 | same as 190.001 + emissions that include biomass burning emissions at the surface |
PD diags | PI diags | |

190.014 | same as 190.001 +prescribed_strataero_use_chemtrop = .true. |
PD diags | PI diags | |

190.015 | same as 190.001 + new ozone, oxid and strataero tracer_cnst_datapath= '/glade/p/acd/tilmes/inputdata/ozone' rad_climate = 'A:Q:H2O', 'N:O2:O2', |
PD diags | PI diags | New datasets are used to make 1850 and 2000 consistent |

190.016 | same as 190.001 + increase of sea-salt by 20% |
PD diags | PI diags | |

190.017 | same as 190.001 |
PD diags | PI diags | |

190.018 | same as 190.017 |
PD diags | PI diags |